Specifying A Document Type - Oki MB472dn User Manual

Specifying a Document Type

If you select a document type, the document can be scanned at the most suitable quality.
1.
Press (SCAN).
2.
Set a document in the ADF or on the document glass.
3.
Select a scan type from [Scan Menu], and then press
4.
Press to select [Scan Setting], and then press
5.
Press to select [Image Settings], and then press
6.
Press to select [Document Type], and then press
7.
Press to select a document type, and then press
Available type settings
Text, Text&Photo*,
* indicates the factory default setting.
Memo
[Text]: Set when copying a text document.
[Text&Photo]: Set when copying a document having texts and photos. The well-balanced text and photo are reproduced on
an image.
[Photo]: Set when copying photos and graphic documents. Images are reproduced with the focus on grayscales. In [Photo]
mode, it takes longer to scan.
[Photo (Glossy)]: Set when copying photo documents printed on a glossy silver halide photography or glossy inkjet paper.
Images are reproduced with the focus on grayscales in consideration of the glossy.
Note
If you select [Text], the gray level may decrease depending on the document.
If you select [Photo] or [Photo (Glossy)], fine texts or lines may be blurred depending on the document. It takes longer to
scan.
If you select [Photo (Glossy)], images may be bright.
8.
Press or
Scanning starts.
Photo, Photo (Glossy)
.
(OK).
(OK).
(OK).
(OK).
(OK).
104