Table of Contents
Advertisement
Setting the Reception Protocol to [POP3]
1.
Press
(SETTING).
2.
Press
to select [Easy Setup], and then press
3.
Enter the administrator password.
The factory default setting is "aaaaaa".
Entering Characters
4.
Select [Enter], and then press
5.
Press
to select [E-mail Setting], and then press
6.
Press
to switch to the mail server address entry screen.
7.
Enter the address of the SMTP server.
8.
Select [Enter], and then press
9.
Press
to switch to the sender entry screen.
10.
Enter the sender.
11.
Select [Enter], and then press
12.
Enter the e-mail address of the machine that is used as the destination.
13.
Press
to select [POP3], and then press
14.
Press
to switch to the POP3 server entry screen.
15.
Enter the address of the POP3 server.
16.
Select [Enter], and then press
17.
Press
to select [POP Before SMTP], and then press
18.
Enter the POP user ID.
19.
Select [Enter], and then press
20.
Press
to switch to the POP3 password entry screen.
21.
Enter the POP password.
22.
Select [Enter], and then press
23.
Press
(OK) until the Setup Menu screen is displayed.
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
845
(OK).
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
