Oki MB472dn User Manual page 555

sound. paper when the temperature inside is high.
The machine does not The machine is warming up to exit Power
start printing Save, Sleep mode, or Deep Sleep mode.
immediately.
The machine may be cleaning the image
drum.
The machine is adjusting the temperature of
the fuser unit.
The machine is processing data from
another interface.
Even if the [Density] -
setting is changed,
printing results do not
change.
Printing stops The temperature inside the machine rises
halfway. due to continuous printing for a long time,
resulting in the temperature being adjusted.
The specified settings The machine is left turned off for a long
such as the time time, or turn the machine on and off every
setting have been time you use the machine.
erased.
Free space in memory The print data is complicated.
is insufficient.
All pages are not The WSD port is used.
printed.
Printing is slow. Printing process is also processed in the
computer.
You have selected [High Quality (Multiple
tones)] on the [Print Job Options] tab of the
printer driver.
The print data is complicated.
The printer driver is The printer driver may not be operating
not correctly correctly.
displayed. (Mac OS X)
The machine turns off If the machine is not used for a certain
automatically. period of time (the factory default is
4 hours), the machine turns off
automatically. This function is called Auto
Power Off.
with the operation.
You can set to extend the time of period
for entering Power Save mode, Sleep
mode or Deep Sleep mode by following
the procedure below.
Press (SETTING), and then select
[Management] > [Power Save] > [Power
Save Time] > [Sleep Time].
Wait for a while.
Wait for a while.
Wait until printing is completed.
-
Wait for a while.
When the machine reaches the suitable
temperature, printing restarts
automatically.
The battery may reach its lifetime. Contact
your dealer.
Simplify the print data.
Change the print port to Standard TCP/IP
Port.
Use a computer with faster processing
speed.
Select [Fine / Detail (600x1200)] or
[Normal (600x600)] on the [Job Options]
tab of the printer driver.
Simplify the print data.
Uninstall the printer driver, and then install
it again.
Press (SETTING), and then select
[Admin Setup] > [User Install] > [Power
Setup] > [Auto Power Off] and disable the
function.
554
Saving Power
Consumption
with the Power
Save Function
-
-
-
Adjusting the
Density
-
-
-
-
-
-
-
Removing Drivers
(Windows)
Installing a
Driver and
Software to a
Computer
Reducing Power
Consumption by
Automatically
Turning the
Machine Off