Oki MB472dn User Manual page 811

The machine starts searching for wireless LAN access points. Wait for a while.
A list of SSIDs of valid wireless LAN access points is displayed.
8.
Press to select [Manual Setup], and then press
9.
When the [Enter the SSID.] message is displayed, press
10.
Enter the SSID, select [Enter], and then press
Note
The SSID is case sensitive. Enter the SSID correctly.
11.
When the [Set the security.] message is displayed, select the encryption method that you selected in
step 1, and then press
Memo
The encryption key varies depending on the wireless LAN access point or security.
12.
When the [Set the encryption type.] message is displayed, select AES.
13.
When the [Enter the Pre-shared Key.] message is displayed, press
14.
Enter the Pre-shared Key, select [Enter], and then press
The SSID of the wireless LAN access point that you selected in step 10 and the security setting that you selected in step 12 are
displayed in on a confirmation screen.
15.
If the displayed content is the same as that you prepared in step 1, select [Yes], and then press
(OK).
(OK).
810
(OK).
(OK).
(OK).
(OK).
(OK).