Sending A Fax - Oki MB472dn User Manual

Sending a Fax

1.
Press (FAX).
2.
Set a document in the ADF or on the document glass.
3.
Check that [Fax] is selected, and then press
4.
Check that [Add Destination] is selected, and then press
5.
Specify a destination.
Specify a destination in one of the following ways.
Using Direct Entry
Selecting from the Phone Book
Using a One-touch Key
Selecting from the Transmission History and Reception History
6.
Change [Fax Functions] if necessary.
Memo
If you press
sending a document.
[Scan Size]: A4
[Resolution]: Normal
[Density]: 0
Scanning Multiple Documents Continuously on the Document Glass (Continuous Scan (Document Glass))
Scanning Multiple Documents Continuously with the ADF (Continuous Scan (ADF))
Scanning a Duplex Document (Duplex Scan)
Specifying a Scan Resolution (Resolution)
Setting Scanning for Transmission
Erasing Edge Shadows When Sending (Edge Erase)
7.
Press (START).
Transmission starts.
(START) without changing anything, the following (factory default) settings are applied for scanning and
(OK).
(OK).
270