Oki MB472dn User Manual page 127

Erasing Edge Shadows (Edge Erase)
When you scan a document with the document glass cover opened or when you scan a book, a black shadow may appear around the
edges on the scanned image. The edge erase function allows you to erase the black shadow.
Memo
[Edge Erase] is set to [ON], and [Width] to 2 mm by factory default.
The default value of the edge width to erase can be changed from [Admin Setup] > [Scanner Setup] > [Default Settings] > [Edge
Erase] > [ON] > [Width].
1.
Press (SCAN).
2.
Set a document in the ADF or on the document glass.
3.
Select a scan type from [Scan Menu], and then press
4.
Press to select [Scan Setting], and then press
5.
Press to select [Edge Erase], and then press
6.
Press to select [ON], and then press
7.
Enter a value from 2 to 50 mm in [Width] by using the 10-key pad, then press
8.
Press or
Scanning starts.
.
(OK).
(OK).
(OK).
(OK).
126
(OK).