Scanning; Scanner Operation - Oki MC560 User Manual
Hide thumbs
Also See for MC560:
- Quick setup (2 pages) ,
- Handy reference (165 pages) ,
- Service & troubleshooting manual (91 pages)
Table of Contents
Advertisement
S
CANNING
S
CANNER OPERATION
1.
Start your scanning application.
2.
Select the File menu and choose Select Source.
If the Select Source command is not available on the File menu, see your application's
user's guide to determine how the TWAIN link is used. A dialogue box with a list of
scanning sources appears.
3.
Select "MC560".
You need to select the source only once, unless you want to choose another scanner.
4.
Place the document face DOWN on the document glass or face UP in the ADF.
5.
Select the File menu and choose Acquire.
A dialogue box containing scanning features appears.
6.
Select the scanning method you want to use from the Scan Method (1) drop-down
menu.
7.
Select the mode you want to use for your scans from the Image Type (2) drop-
down menu.
8.
Select a scanning resolution from the Resolution (3) drop-down menu.
9.
Select the setting for the scanning features (e.g. Sharpen, Descreen, etc.) that you
want to use (see "enhancing your image" later in this Chapter).
10.
Click on the Preview or Scan button to preview or scan you documents.
Operation > 71
1
2
3
Advertisement
Table of Contents
