1.
Press
(SETTING).
2.
Press
to select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press
5.
Press
to select [Fax Setup], and then press
6.
Press
to select [Other Settings], and then press
7.
Press
to select [Block Junk Fax List], and then press
8.
Select [Setting], and then press
9.
Press
to select [Mode2] or [Mode3], and then press
10.
Press
to select [Registered List], and then press
11.
Press
to select a registered box, and then press
Memo
To change a registered number, select a box that has the number to change.
12.
Check that [Register/Edit] is selected, and then press
13.
Enter the last four to eight digits of the telephone number to block junk faxes by using the 10-key pad.
14.
Press [Enter].
15.
To continue registering another number, repeat the procedure from step 11.
Deleting a Registered Number
1.
Press
(SETTING).
2.
Press
to select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press
5.
Press
to select [Fax Setup], and then press
6.
Press
to select [Other Settings], and then press
7.
Press
to select [Block Junk Fax List], and then press
8.
Press
to select [Registered List], and then press
9.
Press
to select a box to delete, and then press
10.
Press
to select [Delete], and then press
11.
Select [Yes].
The number is deleted.
Memo
If you select [No], the number is not deleted, and you return to step 9.
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
326
(OK).
(OK).
(OK).
(OK).