Adjusting The Saturation (Saturation) - Oki MB472dn User Manual

Adjusting the Saturation (Saturation)

This section describes how to change the default setting of the saturation when scanning.
1.
Press (SETTING).
2.
Press to select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press
5.
Press to select [Scanner Setup], and then press
6.
Press to select [Default Settings], and then press
7.
Press to select [Image Settings], and then press
8.
Press to select [Saturation], and then press
9.
Press or
(OK).
to select a value, and then press
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
719