Adjusting the Density (Density)
You can adjust the copy density in seven levels.
1.
Press
(COPY).
2.
Set a document in the ADF or on the document glass.
3.
Press
to display the [Change Settings] menu.
4.
Press
to select [Image Settings], and then press
5.
Check that [Density] is selected, then press
6.
Press
or
Available density settings
+3,
+2,
+1,
* indicates the factory default setting.
Memo
[0] is the standard value. To increase the density, select [+1], [+2], or [+3] (darkest). To decrease the density, select [-1], [-
2], or [-3] (lightest).
7.
Press
(START).
Copying starts.
Topics
You can change other copy settings.
Changing Settings before Copying
to select the desired density, and then press
0*,
-1,
-2,
-3
(OK).
(OK).
(OK).
31