Oki MB472dn User Manual page 848

Setting the Reception Protocol to [SMTP]
1.
Press (SETTING).
2.
Press to select [Easy Setup], and then press
3.
Enter the administrator password.
The factory default setting is "aaaaaa".
Entering Characters
4.
Select [Enter], and then press
5.
Press to select [E-mail Setting], and then press
6.
Press to switch to the mail server address entry screen.
7.
Enter the address of the SMTP server.
8.
Select [Enter], and then press
9.
Press to switch to the sender entry screen.
10.
Enter a sender.
11.
Select [Enter], and then press
12.
Enter the e-mail address of the machine that is used as the destination.
13.
Press to select [SMTP], and then press
14.
Press to select [SMTP Auth], and then press
15.
Press to switch to the SMTP user ID entry screen.
16.
Enter the SMTP user ID.
17.
Select [Enter], and then press
18.
Press to switch to the SMTP password entry screen.
19.
Enter the SMTP password.
20.
Select [Enter], and then press
21.
Press (OK) until the Setup Menu screen is displayed.
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
847