Printing On Long Paper; Loading Long Paper - Oki MB472dn User Manual

Printing on Long Paper

Loading Long Paper

For Windows PCL Printer Driver
For Windows XPS Printer Driver
For Mac OS X PCL Printer Driver
Set a paper size and paper type of the MP tray from the operator panel. Then, register a paper size with a printer driver.
Note
Register the paper size so that the length is longer than the width. You cannot set the length that is shorter than the width.
This function may not be available for some applications.
If the paper length exceeds 356 mm, the print quality may not be guaranteed even if the paper is used under the recommended
conditions.
Loading Long Paper
When printing on long paper, change the paper type setting, and use the MP tray and faceup stacker.
1.
Load paper in the MP tray.
2.
Open the faceup stacker.
3.
Press (SETTING).
4.
Press to select [Paper Setup], and then press
5.
Press to select [MP Tray], and then press
6.
Check that [Paper Size] is selected, and then press
7.
Press to select [Custom], and then press
8.
Enter "210" or "215" in [Width], and "900" or "1200" in [Length] for long paper by using the 10-key
pad, and then press
The long paper is 210 mm or 215 mm in width, and 900 mm or 1200 mm in length.
9.
Press to select [Media Type], and then press
10.
Press to select [Plain], and then press
11.
Press to select [Media Weight], and then press
12.
Press to select [Heavy], and then press
13.
Press until the top screen is displayed.
Next, set printing settings from a printer driver.
Topics
Available long paper
About Paper Sizes, Weight, and Number of Sheets That Can be Loaded
For Windows PCL Printer Driver
1.
Select [Print] from the [File] menu.
2.
Click [Preferences].
3.
Select [Banner 210.0 x 900.0 mm], [Banner 215.0 x 900 mm], or [Banner 215.0 x 1200.0 mm] from
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
178