Oki MB472dn User Manual page 357

Scanning Multiple Documents Continuously (Continuous Scan)
You can scan a fax transmission document from the ADF and document glass. For example, you can send a document and a part of a
book as a single fax job.
1.
Press (FAX).
2.
Set a document in the ADF or on the document glass.
3.
Press to select [Internet Fax], and then press
4.
Press to select [Scan Setting], and then press
5.
Press to select [Continuous Scan], and then press
6.
Press to select [ON], and then press
7.
Press until the start screen is displayed.
8.
Specify a destination.
Specify a destination in one of the following ways.
Using Direct Entry
Selecting from the Address Book or Group List
Using a One-touch Key
Selecting from the Transmission History
Specify a Destination by Searching the LDAP Server
9.
Press (START).
10.
When [Please set next document] is displayed, set the next document.
11.
Check that [Start Scan] is selected, and then press
12.
Repeat steps 10 and 11 for each fax transmission document if necessary.
13.
When scanning all sets of the documents is complete, press
press (OK).
14.
Press (START).
Transmission starts.
Topics
You can cancel document scanning and transmissions.
Cancelling an Internet Fax Transmission
(OK).
(OK).
(OK).
(OK).
(OK).
to select [Scan Complete], and then
356