Using The Operator Panel - Oki MB472dn User Manual

Using the Operator Panel

You can set Power Save mode from the operator panel.
Set the length of idle time before entering Power Save mode.
1.
Press (SETTING).
2.
Press to select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
Entering Characters
4.
Select [Enter], and then press
5.
Press to select [Management], and then press
6.
Press to select [Power Save], and then press
7.
Press to select [Power Save Time], and then press
8.
Press to select the transition time, and then press
Available transition time settings
1 minute*, 2 minutes,
* indicates the factory default setting.
9.
Press until the top screen is displayed.
(OK).
3 minutes, 4 minutes, 5 minutes,
(OK).
(OK).
(OK).
(OK).
(OK).
10 minutes, 15 minutes,
447
30 minutes, 60 minutes