Faxserver Function - Oki MB472dn User Manual

FaxServer Function

You can set the initial values of FaxServer Function.
1.
Press (SETTING).
2.
Select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press
5.
Press to select [FaxServer Function], and then press
6.
Change the setting, and then press
7.
Press until the top screen is displayed.
Item
Environmental FaxServer
Settings Function
Prefix
Suffix
Text
Default Settings Scan Size
Density
Resolution
Background
Removal
Continuous
Scan
Compression
Rate
Security Function Broadcast
Destination
Confirm Dial
(OK).
(OK).
(OK).
Factory default Description
setting
OFF Sets whether to use scanning to fax server.
(NULL) Sets to prefix code for scanning to fax server.
@faxserver Sets to suffix code for scanning to fax server.
OFF Sets whether to add body text.
A4 or Letter Sets the default scan size.
0 Sets the default density.
Normal Sets the default resolution.
Auto Sets the default setting of the background removal.
OFF Sets whether to use Continuous Scan mode by default.
Low Selects the default compression level.
ON Sets whether to indicate the transmission destination number before starting
broadcast transmission.
OFF Sets whether to reenter the transmission destination fax number before
sending.
(OK).
584