Loading Envelopes; Printing On Envelopes - Oki MB472dn User Manual

Printing on Envelopes

Loading Envelopes

For Windows PCL Printer Driver
For Windows XPS Printer Driver
For Mac OS X PCL Printer Driver
Note
Curling or creasing may occur after printing. Be sure to perform a test print to check that no problems exist.
Load envelopes with the address side up in the direction as described below.
If you are using envelopes with the flap (for gluing) on the long edge (Monarch, Com-9, Com-10, DL, C5, C6), load them with
the flap folded so that the flap is on the left side when fed.
Duplex printing is not available for envelopes.
Loading Envelopes
When printing on envelopes, change the paper size setting, and use the MP tray and faceup stacker.
1.
Load envelopes in the MP tray.
2.
Open the faceup stacker.
3.
Press (SETTING).
4.
Press to select [Paper Setup], and then press
5.
Press to select [MP Tray], and then press
6.
Check that [Paper Size] is selected, and then press
7.
Press to select [Envelope*], and then press
* Select an envelope type.
8.
Press until the top screen is displayed.
Next, set printing settings from a printer driver.
Topics
Available envelope types.
About Paper Sizes, Weight, and Number of Sheets That Can be Loaded
The manual feed mode is available for envelopes.
Printing Manually One by One
For Windows PCL Printer Driver
1.
Select [Print] from the [File] menu.
2.
Click [Preferences].
3.
Select [Envelope*] from [Size] on the [Setup] tab.
* Select an envelope type.
4.
Select [Multipurpose Tray] from [Source].
5.
Select [Landscape] from [Orientation].
6.
Change other settings if necessary, and then click [OK].
7.
Click [Print] on the [Print] screen.
(OK).
(OK).
(OK).
(OK).
174