Oki MB472dn User Manual page 808

A list of SSIDs of valid wireless LAN access points is displayed.
8.
Press or to select a wireless LAN access point, and then press
Note
If only [Manual Setup] is displayed, or the SSID of the wireless access point you want to use is not included in the list, set by
following the procedure in
The encryption key entry screen that is suitable for the encryption method of the selected wireless LAN access point is displayed.
9.
Enter the encryption key.
Memo
The encryption key varies depending on the wireless LAN access point or security.
If the [Enter the Pre-shared Key.] message is displayed
Item
Security
Encryption key
If the [To make this setting, make the changes from the web page.] message is displayed
Item
Security
Set from the Web page of this machine.
Using the Web Page of This Machine
If neither of the above two cases is applied
Item
Security
Encryption key
The SSID of the wireless LAN access point that you selected in step 8 is displayed in
encryption methods above is also displayed as Security.
10.
If the displayed SSID is the same as the SSID that you prepared in step 1, select [Yes], and then press
(OK).
When the following screen is displayed, the setting of the wireless LAN is complete.
If the following screen is displayed, repeat the procedure from step 5.
"Setting from the Operator Panel Manually to
Description
WPA2-PSK
Enter the Pre-shared Key.
Description
WPA2-EAP
Connect".
Description
Disable
No entry is required.
807
(OK).
on a confirmation screen, and one of the