Setting to Use WSD Scan
To use the Scan to PC (WSD Scan) function and the Remote Scan (WSD Scan) function via the WSD Scan connection, follow the
procedure below.
1.
Press
(SETTING).
2.
Press
to select [Admin Setup], and then press
3.
Enter the administrator password.
4.
Select [Enter], and then press
5.
Press
to select [Scanner Setup], and then press
6.
Press
to select [WSD Scan Setup], and then press
7.
Check that [WSD Scan] is selected, and then press
8.
Press
to select [Enable], and then press
9.
Press
until the top screen is displayed.
(OK).
(OK).
(OK).
(OK).
(OK).
97
(OK).