Quick Start Up Uploading From Switch To Out-Of-Band Pc (Only Xmodem); Quick Start Up Downloading From Out-Of-Band Pc To Switch (Only Xmodem) - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Quick Start up Uploading from Switch to Out-of-Band PC (Only
XMODEM)
Table 6-5. Quick Start up Uploading from Switch to Out-of-Band PC (XMODEM)
Command
copy {
nvram:startup-config |
nvram:errorlog |
nvram:msglog |
nvram:traplog} <url>
Quick Start up Downloading from Out-of-Band PC to Switch
(Only XMODEM)
Table 6-6.

Quick Start up Downloading from Out-of-Band PC to Switch (Only XMODEM)

Command
copy <url> {nvram:startup-config |
system:image}
Quick Start up
Details
The types are:
config - configuration file
errorlog - error log
system trace - system trace
traplog - trap log
The URL must be specified as:
xmodem:filepath/fileName
This starts the upload and also displays the mode of
uploading and the type of upload it is and confirms the
upload is taking place.
For example:
If the user is using HyperTerminal, the user must
specify where the file is going to be received by the
PC.
Details
Sets the download datatype to be an image or
config file.
The URL must be specified as:
xmodem:filepath/fileName
For example:
If the user is using HyperTerminal, the user
must specify which file is to be sent to the
switch.
The Switch will restart automatically once the
code has been downloaded.
202-10102-01, May 2005
6-5