Notes and Restrictions on Job Flows
Job Flows (ApeosPort Series Models Only)
If you transfer fax or Internet fax documents via SMB, FTP, or E-mail, the documents
will be converted into the standard size (such as A4 and A3) and printed.
If a Job Flow is performed with the following settings, an interference pattern may be
created:
- Original Type: [Photo & Text] or [Photo]
- Resolution: [400 dpi] or [600 dpi]
- Internet fax profile for sending Internet faxes: [TIFF-S]
If an interference pattern is created, change the settings as follows:
- Resolution: [200 dpi] or [300 dpi]
- Internet fax profile for sending Internet faxes: [TIFF-F] or [TIFF-J]
Web Application feature (ApeosPort Series Models Only)
The following conditions and restrictions are applied when you print files stored in a
remote server:
- [Output Destination] can be specified, but the staple and hole punch cannot be
specified.
- The [Pages per Side] feature can be specified only when you print PDF files.
- When [Port Settings] is set to [NetWare] or [SMB], set the transport protocol to
[TCP/IP].
- HTTP or HTTPS can be used for the communications between the machine and
a remote server.
- Printable file formats are [TIFF], [PDF], and [XPS].
- Print data is spooled to the hard disk of the machine, and then printed as a job.
Therefore, the print data is recognized as a job while the data is being spooled to
the hard disk.
- The optional hard disk is required for this feature.
- The Secure Print feature cannot be used.
- Printing is available even when [Auto Print] is set to [On] under [Machine Clock /
Timers].
- "Web Applications - Print" is displayed on the [Job Status] screen.
- The <Online> indicator is unlit while the print data is being spooled to the hard disk.
Job Flow Settings for High Compression Format
When [MRC High Compression] is set to [On] under [File Format] for the Scan features,
select one of the alternatives for each setting item:
- Color Scanning: [Auto Detect], [Color], or [Grayscale]
- Resolution: [200 dpi] or [300 dpi]
- Reduce / Enlarge: [100%]
- File Format (without thumbnail specification): [PDF], [DocuWorks], or [XPS]
- File Format (with thumbnail specification): [DocuWorks] or [XPS]
Important • If settings other than the above are used, you can register a Job Flow sheet on the machine,
but an error occurs when the machine executes the Job Flow and the Job Flow cannot be
carried out.
Notes and Restrictions
647
16