Installation When Using Tcp/Ip (Lpd/Port 9100); Step 1 Preparations; Step 2 Configuration On The Machine - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

7 Printer Environment Settings

Installation When Using TCP/IP (LPD/Port 9100)

This section describes how to install the machine using TCP/IP.
The following shows the reference section for each procedure.

Step 1 Preparations....................................................................................................................286

Step 2 Configuration on the Machine .......................................................................................286

Step 3 Configuration on the Computer .....................................................................................287
CentreWare Internet Services Setting Items .............................................................................288
Step 1 Preparations
The following items are required to use the machine via TCP/IP (LPD/Port 9100).
TCP/IP network environment
The Driver CD Kit (provided with the machine or option)
The Adobe PostScript 3 Kit (optional) - this is required only when using a Macintosh
computer
Note
7
Step 2 Configuration on the Machine
The following describes the configuration procedures to use TCP/IP (LPD/Port 9100)
on the machine. Enable the LPD Port or the Port 9100 port, and then configure TCP/IP
settings.
Note
For the items that can be configured using CentreWare Internet Services, refer to "CentreWare Internet
Services Setting Items" (P.288). For information on how to configure the setting using the Driver CD
Kit, refer to the manual contained in the Driver CD Kit.
1
Display the [Tools] screen.
1) Press the <Log In/Out> button.
2) Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's
passcode, and select [Enter].
Note
3) Select [Tools] on the [Services Home] screen.
2
Enable the LPD port or Port 9100 port as appropriate.
In this example, the LPD port is enabled.
1) Select [Connectivity & Network Setup].
2) Select [Port Settings].
3) Select [LPD], and then select [Change Settings].
286
• For Mac OS 9.2.2 English, and Mac OS X 10.3.9 - 10.4.11/10.5/10.6 English, the Adobe
PostScript 3 Kit (optional) is required to use the LPD port. However, for Mac OS X 10.5/10.6
English, you can use the LPD port without the Adobe PostScript 3 Kit (optional) if you install
the print driver for Max OS X contained in the CD-ROM provided with the driver.
• For Mac OS X 10.6, you can use the Port9100 port without the Adobe PostScript 3 Kit
(optional) if you install the print driver for Mac OS X.
• You can configure the settings using CentreWare Internet Services or the Driver CD Kit.
• The default user ID is "11111".
• The default passcode is "x-admin".