Esc/P-K Emulation Settings - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

16 Appendix

ESC/P-K Emulation Settings

The following tables show the basic and extended settings that can be configured on
the ESC/P-K emulation mode menu.
Basic Settings
Setting Item
Paper tray
16
578
Item
Number
3 Sets the paper tray to be used for printing.
[0]
[1] (Default)
[2]
[3]
[4]
[5]
[6]
If printing from Tray 5, instruct printing and then operate the machine to
start printing. To cancel the setting, change the setting for "Tray 5
Confirmation".
Important • When Trays 1 to 4 or Trays 6 is selected, the paper size is determined
by the size of paper loaded in the tray, and thus [Paper Size] cannot
be set.
When [Auto] is selected and paper of the same size in the same orientation in
multiple trays is loaded, paper will be fed in the order of Tray 1
Tray 4 Tray 6. If paper of the same size is loaded in multiple trays but in
different orientations, feeding of the paper loaded in the landscape orientation is
prioritized.
Value
: Auto
: Tray 1
: Tray 2
: Tray 3
: Tray 4
: Tray 5
: Tray 6 (HCF)
Tray 2 Tray 3