Configuration Of Scan To Home (Apeosport Series Models Only); Step 1 Preparations; Step 2 Enabling Smb Port And Setting Up Tcp/Ip - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

Configuration of Scan to Home (ApeosPort Series Models Only)

This section describes how to configure the machine to use the Scan to Home service.
The following shows the reference section for each procedure.

Step 1 Preparations................................................................................................................... 319

Step 2 Enabling SMB Port and Setting up TCP/IP .................................................................. 319

Step 3 Configuring Remote Authentication ............................................................................. 320
Step 4 Configuring Scan to Home............................................................................................ 321
Step 5 Configuration on the Computer .................................................................................... 323
Step 1 Preparations
The Scan to Home service allows you to forward scanned files to recipients which vary
depending on a login user when [Login to Remote Accounts] is selected for [Login
Type].
The following items are required to use the Scan to Home feature.
Remote Authentication System
To use the Scan to Home service, a remote authentication system is required.
For more information about a remote authentication system, refer to "Authentication System" (P.179).
Destination Computer
The following operation system must be installed on a destination computer.
For Mac OS X, a sharing user account is required on the Mac OS X.
Microsoft Windows 2000
Microsoft Windows Server 2003
Microsoft Windows Server 2008
Microsoft Windows Server 2008 R2
Microsoft Windows XP
Microsoft Windows Vista
Microsoft Windows 7
Mac OS X 10.2.x/10.3.x/10.4.x/10.5/10.6
Step 2 Enabling SMB Port and Setting up TCP/IP
To use Scan to Home service, enable the SMB port and set the IP address. The
following describes the configuration procedures on the machine.
Note • You can configure the settings using CentreWare Internet Services. For information on how
1
Display the [Tools] screen.
1) Press the <Log In/Out> button.
Configuration of Scan to Home (ApeosPort Series Models Only)
to use CentreWare Internet Services, refer to "Configuring Machine Settings Using
CentreWare Internet Services" (P.273).
9
319