Creating An Authorization Group - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

14 Authentication and Accounting Features

Creating an Authorization Group

Perform the following procedures to add authorization groups, if necessary.
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's
passcode, and select [Enter].
Note
3
Select [Tools] on the [Services Home] screen.
4
Select [Authentication/Security Settings].
5
Select [Authentication].
6
Select [Create Authorization Groups].
7
Select a group displayed as [(No Name)], and then select [Create/Delete].
8
Enter a group name into [Group Name].
9
Set the other items.
For more information on the authorization group settings, refer to "Create Authorization Groups"
(P.260).
10
Select [Close] repeatedly until the [Tools] screen is displayed.
11
Select [Close].
14
396
• The default user ID is "11111".
• The default passcode is "x-admin".