Authentication For Job Flow Sheets And Folders; Overview - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

Authentication for Job Flow Sheets and Folders

This section describes the restrictions of job flows, folders, and job flow sheets and
folder links when the Authentication feature is enabled.

Overview .................................................................................................................................. 381

When the Authentication Feature is Disabled.......................................................................... 383
When the Authentication Feature is Enabled ........................................................................... 386
Overview
Job Flow Sheet Types and Overview
Job flow sheets that you can create on the machine targets the documents stored in
folders. You can create job flow sheets that can handle documents in folders and
scanned documents using EasyOperator and Device Setup Tool from a computer on a
network.
Note • For information on job flow sheets that you can create on the machine, refer to "6 Send from
You can create job flow sheets for folder operations on the machine. Job flow sheets
for scanner operations can be created on a computer connected to a network using
software such as EasyOperator.
The job flow sheets created on the computer cannot be edited or copied on the
machine.
The following four types of job flow sheets are available for the machine:
General Shared Job Flow Sheets
This is a job flow sheet created on the [Create Job Flow Sheet] screen by a local user
when the Authentication feature is disabled.
When the Authentication feature is disabled, this type of job flow sheet can be shared
and its settings can be changed by any machine user.
When the Authentication feature is enabled, this type of job flow sheet can be operated
only by the system administrator.
Folder Job Flow Sheets
This is a job flow sheet created by a local user or the system administrator on the
[Create Folder] or [Send from Folder] screen when the Authentication feature is
disabled.
The owner of the job flow sheet is the "folder" from which it was created. For example,
the owner of a job flow sheet created in Folder 001 will be "Folder 001", and the job flow
sheet can be used only in Folder 001.
Any users who have access to the folder upon the job flow sheet creation can use the job
flow and change its settings.
This job flow sheet can be used by any machine user when the Authentication feature
is disabled. When the Authentication feature is enabled, this job flow sheet can be
operated only by the system administrator.
Folder"> "Configuring/Starting Job Flow" in the User Guide. EasyOperator is included in the
Driver CD Kit. Device Setup Tool is included in ApeosWare Management Suite, which you
can download from our web site.

Authentication for Job Flow Sheets and Folders

14
381