Authentication; Login Type - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

5 Tools
System Administrator's Passcode
Set the passcode for the System Administrator.
Setting a passcode is strongly recommended to enhance security.
Note
The system administrator's passcode set here is used when [Passcode Entry from Control
Panel] is set to [On] under [Authentication/Security Settings] > [Passcode Policy].
Set the passcode after setting the system administrator's user ID. You can set the passcode
from 4 to 12 characters.
For more information about Passcode Entry from Control Panel, refer to "Passcode Policy" (P.262).
1
Select [System Administrator's Passcode].
2
Select [New Passcode].
3
Enter a new passcode (4 to 12 digits) using
the keyboard displayed, and then select
[Save].
Note
4
Select [Retype Passcode], enter the same
passcode, and then select [Save].
5
Select [Save].
5
6
A confirmation window appears. Select [Yes] to confirm your entry.

Authentication

In [Authentication], you can set the following items.
The following shows the reference section for each setting.

Login Type................................................................................................................................258

Access Control ..........................................................................................................................259
Create/View User Accounts......................................................................................................260
Reset User Accounts .................................................................................................................260
Create Authorization Groups ....................................................................................................260
User Details Setup.....................................................................................................................261
Maximum Login Attempts........................................................................................................262
Passcode Policy.........................................................................................................................262
Charge/Private Print Settings ....................................................................................................263
Login Type
Allows you to select a type of authentication.
No Login Required
Does not use the Authentication feature.
Login to Local Accounts
Authenticates users based on the user information registered on the machine.
Note
258
• The default of the system administrator's passcode is "x-admin".
• If no passcode is set, leave the text boxes
blank and select [Save].
• When [Login to Local Accounts] is selected, the machine enters the Login mode and [Login]
is displayed at the lower left of the [Services Home] screen.