Pdf Direct Print - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

PDF Direct Print

PDF Direct Print is a feature that prints PDF files by directly using the lpr command
instead of a print driver. When this feature is used, the following items will be printed
based on the settings of [PDF] under [Print Mode].
Output Quantity
2 Sided Printing
Print Mode
Collate
Note • Two types of the PDF Direct Printing methods are available: the genuine Adobe PDF Direct
• When you use the lpr command to print, specify the number of copies to be printed in the lpr
• Before you print PDF file using the lpr command, the LPD protocol of the machine must be
• PDF Direct Print supports PDF version 1.6.
PDF Direct Print Settings
This section describes the available settings with the PDF Direct Print feature.
The settings configured here are valid when printing PDF files without using
"ContentsBridge" provided by Fuji Xerox.
Note • For information on printing PDF files using ContentsBridge Utility, refer to the manual
Item
Setting Item
Number
Output quantity 401
2 sided printing 402
Print mode 403
Collate 404
Print and the non-PostScript PDF Direct Print (PDF Bridge). You can select which method to
prioritize in the System Administration mode.
command. The copy quantity setting made on [Output Quantity] under [PDF] becomes
invalid. If the copy quantity is not specified in the lpr command, only one copy is printed.
started with the control panel or CentreWare Internet Services.
provided on the Driver CD Kit.
Sets the number of copies to be printed.
[1-999] (Default: 1): 1-999 sheets
Sets the 2 sided printing option.
[0] (Default) : 1 Sided
[1] : 2 Sided, Flip on Long Edge
[2] : 2 Sided, Flip on Short Edge
[2 Sided Print] prints 2 sided in the orientation so that pages can be
bound along the long edge.
[2 Sided Print] prints 2 sided in the orientation so that pages can be
bound along the short edge.
Selects which you prioritize: image quality or print speed.
[0] (Default) : Standard
[1] : High Speed
[2] : Fine
The [Standard] setting prints in a standard speed and quality.
The [High Speed] setting prioritize the print speed.
The [Fine] quality setting prints in high quality but in a slower speed.
Selects whether to print multiple-sheet documents as collated sets (1, 2,
3...1, 2, 3...).
[0] (Default) : Off
[1] : On
Layout
Paper Size
Print Processing Mode
Value
PDF Direct Print
16
591