Loading Paper In Tray 4 (Tandem Tray Module) (Optional); Loading Paper In Tray 5 (Bypass) - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

3
Push the tray in gently until it stops.
Important • When pushing the paper tray in, do it slowly. If the tray is pushed with too much force, it

Loading Paper in Tray 4 (Tandem Tray Module) (Optional)

The following describes the procedure for loading paper into Tray 4 (Tandem Tray
Module).
When the machine runs out of paper during copying or printing, a message is displayed
on the touch screen. Add paper according to the displayed instructions. Copying or
printing automatically resumes when paper is added.
Note • Fan the paper well before loading paper in a tray. It prevents paper from sticking to each
For information on changing the paper size and orientation, refer to "Changing the Paper Size for Tray 4
(Tandem Tray Module) (Optional)" (P.52).
1
Pull out the tray until it stops.
Important • While the machine is processing a job, do
• Do not add a new stack of paper on top of
2
Load and align the edges of the paper
against the left edge of the tray, with the side
to be copied or printed on facing up.
Important • Do not load paper above the maximum fill
3
Push the tray in gently until it stops.
Important • When pushing the paper tray in, do it slowly. If the tray is pushed with too much force, it

Loading Paper in Tray 5 (Bypass)

When printing or copying on a size or type of paper that cannot be set in Trays 1 to 4
and 6, use Tray 5 (Bypass).
The following describes the procedure for loading paper into Tray 5 (Bypass). For
printings, specify the instructions using the [Paper/Output] tab in the print driver. Also
specify the type of paper to be loaded.
Important • Do not add a new stack of paper on top of the remaining paper in the tray to prevent paper
Note • Fan the paper well before loading paper in a tray. It prevents paper from sticking to each
might cause machine malfunctions.
other and reduces paper jams.
not pull out the tray that the job uses.
the remaining paper in the tray to prevent
paper jams or any other troubles. First,
remove the remaining paper from the
tray, and then load the new stack of
paper.
line. It might cause paper jams or
machine malfunctions.
might cause machine malfunctions.
jams or any other troubles. First, remove the remaining paper from the tray, and then load
the new stack of paper.
other and reduces paper jams.
Loading Paper
2
47