Trouble During Copying; Unable To Copy - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

Trouble during Copying

This section describes how to resolve copy problems.

Unable to Copy

If you cannot copy a document, identify the symptom in the following table to perform
the remedy.
Symptom
The document is
not correctly fed
from the
document
feeder.
Cause
The document is too small.
The document type is
unsuitable.
The document guides are
set in incorrect positions.
A piece of torn paper
remains in the document
feeder.
Documents of mixed sizes
are loaded.

Trouble during Copying

Remedy
The minimum size of the document that
can be loaded on the document feeder is
125 x 85 mm (A5, A5 ).
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
The document feeder does not feed
irregular sized documents, business cards,
transparencies, or thin documents.
In addition, the document feeder does not
feed documents with sticky tags, paper
clips, or adhesive tape.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Adjust the document guides to the
document.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Open the document feeder cover, and
remove the piece.
Refer to "Document Jams" (P.545).
When loading documents of mixed sizes,
be sure to set [Mixed Size Originals] to
[On]. Otherwise, a paper jam will occur.
Refer to "3 Copy" > "Layout Adjustment" >
"Mixed Size Originals (Scanning Different
Size Documents Simultaneously)" in the User
Guide.
15
415