Centreware Internet Services Setting Items - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

8 E-mail Environment Settings
When [POP3] is selected for [Protocol to Receive E-mail]
Configure the POP3 server.
For information on how to configure the POP3 server, refer to "POP3 Server Settings" (P.178).
5
Configure the server settings for sending e-mails.
Note
For information on how to configure the e-mail transmission, refer to "SMTP Server Settings" (P.178).
6
Select [Close] repeatedly until the [Tools] screen is displayed.
7
Configure the domain filtering for receiving e-mails as necessary.
For information on how to configure the domain filtering, refer to "Domain Filtering" (P.188).
8
Set up the S/MIME information.
1) Select [Connectivity & Network Setup].
2) Select [Security Settings].
3) Select [S/MIME Settings], and then set the items.
For more information on how to configure S/MIME, refer to "S/MIME Settings (ApeosPort Series
Models Only)" (P.184).
9
Select [Close] repeatedly until the [Tools] screen is displayed.
10
Select [Close].
Note
11
Print a configuration report to confirm that the settings of each item.
8
For information on how to print a configuration report, refer to "Print Reports" (P.87).

CentreWare Internet Services Setting Items

You can configure the following setting items using CentreWare Internet Services:
For details on the setting items, click [Help] at the upper right corner of the CentreWare Internet
Services screen to see help.
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet
Services" (P.272).
Machine's E-mail Address
Setup E-mail Notification
Port Settings
SMTP Server Settings
POP3 Server Settings
Receiving Protocol
Domain Filtering
S/MIME Settings
306
• To send e-mails, SMTP server settings are required. When [POP3] is selected in [Protocol to
Receive E-mail], configure the SMTP server in [Outgoing/Incoming E-mail Settings].
• Rebooting the machine may be required depending on the settings. When a message
displayed on the screen, follow the message and reboot the machine.