Replacing Staple Cartridge (For Finisher-A1) - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

11
Close the Cover A tightly.
12
Close the Tray 5 (Bypass).
13
Close the front cover.
Note • If the front cover is not completely closed, a message will appear and the machine will

Replacing Staple Cartridge (for Finisher-A1)

When the Finisher-A1(optional) is installed and the staple cartridge needs to be
replaced, a message appears on the touch screen. When this message appears, load
a new staple case into the staple cartridge.
Important • The use of staple cartridges not recommended by Fuji Xerox may degrade quality and
Note • To order a staple cartridge, contact our Customer Support Center.
1
Make sure that the machine is not operating,
and open the finisher front cover.
2
Pull the staple cartridge out of the finisher.
3
After you pull out the staple cartridge, check
inside of the finisher for any remaining
staples.
remain paused.
performance. Use only staple cartridges recommended by Fuji Xerox.
Replacing Consumables
65
3