Loading Paper In Tray 3 (Tandem Tray Module) (Optional) - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

2 Paper and Other Media
1
Pull out the tray until it stops.
Important • While the machine is processing a job, do
2
Load and align the edges of the paper
against the left edge of the tray, with the side
to be copied or printed on facing up.
Important • Do not load paper above the maximum fill
2
3
Push the tray in gently until it stops.
Important • When pushing the paper tray in, do it slowly. If the tray is pushed with too much force, it

Loading Paper in Tray 3 (Tandem Tray Module) (Optional)

The following describes the procedure for loading paper in Tray 3 (Tandem Tray
Module).
When the machine runs out of paper during copying or printing, a message is displayed
on the touch screen. Add paper according to the displayed instructions. Copying or
printing automatically resumes when paper is added.
Note
For information on changing the paper size and orientation, refer to "Changing the Paper Size for Tray 3
(Tandem Tray Module) (Optional)" (P.51).
1
Pull out the tray until it stops.
Important • While the machine is processing a job, do
2
Load and align the edges of the paper
against the left edge of the tray with the side
to be copied or printed on facing up.
Important • Do not load paper above the maximum fill
46
not pull out the tray that the job uses.
• Do not add a new stack of paper on top of
the remaining paper in the tray to prevent
paper jams or any other troubles. First,
remove the remaining paper from the
tray, and then load the new stack of
paper.
line. It might cause paper jams or
machine malfunctions.
• Do not place any paper or objects in the
empty space on the right side of Trays 1
to 4. It may cause paper jams or machine
malfunction.
might cause machine malfunctions.
• Fan the paper well before loading paper in a tray. It prevents paper from sticking to each
other and reduces paper jams.
not pull out the tray that the job uses.
• Do not add a new stack of paper on top of
the remaining paper in the tray to prevent
paper jams or any other troubles. First,
remove the remaining paper from the
tray, and then load the new stack of
paper.
line. It might cause paper jams or
machine malfunctions.