Internet Fax Control - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

5 Tools
Line 1 to 3 - Company Logo
Register the sender names for lines 1 to 3. The sender name is printed in the Transmission
Header Text or Cover Page. Enter up to 60 single-byte characters using the keyboard
displayed or the numeric keypad.
G3 Line 1 to 3 - Fax ID
When using G3 communications, register the G3 ID. The G3 ID is normally set to the local
terminal fax number.
Specify a G3 ID with up to 20 digits using the keyboard displayed or the numeric keypad.
Note
G3 Line 1 to 3 - Dial Type
Set the dial type.
Tone
Tone dialing line.
10pps
Pulse dialing line.
G3 Line 1 to 3 - Line Type
Set the line type.
PSTN
5
Subscriber telephone line.
PBX
Private branch exchange.
SIP Line - Company Logo
Register the sender names for IP fax (SIP). The sender name is printed in the Transmission
Header Text or Cover Page. Enter up to 60 characters using the keyboard displayed or the
numeric keypad.
G3 SIP Line - ID
When using G3 communications, register the G3 ID for IP fax (SIP).
Specify a G3 ID with up to 20 digits using the keyboard displayed or the numeric keypad.

Internet Fax Control

You can configure the settings related to the Internet fax control.
Internet Fax Path
Set the Internet fax communication path.
Via E-mail Server
Sends e-mail via an SMTP server.
Direct (P2P)
Directly sends to the machine with the Internet Fax feature, without going through an SMTP
server.
You can specify the following two types of e-mail address for the Internet Fax feature:
Specifying a host name
@ must be followed by FQDN.
Example: local-part@device.domain.jp
212
• A G3 ID (fax number) can consist of not more than 20 digits, including 0 to 9, +, and space.