Configuration For Ic Card Reader (Optional); Step 1 Preparations; Step 2 Logout Method Using The Smart Card - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

Configuration for IC Card Reader (Optional)

You can use a smart card for authentication by comparing the information registered
on the smart card and the user information on the machine. You can also restrict the
machine use and perform accounting of the jobs using the information registered on
the smart card.
This section describes the supported smart cards and how to register a smart card to
use at the machine.
Note • An optional component is required to use this feature. For more information, contact our
The following shows the reference section for card information and each procedure.

Step 1 Preparations................................................................................................................... 397

Step 2 Logout Method Using the Smart Card .......................................................................... 397

Step 3 Registering Smart Card Information............................................................................. 398
Step 1 Preparations
The following smart card types are supported by the embedded IC Card Reader.
MIFARE
- Fuji Xerox IC Card (Type A)
- Other MIFARE compatible smart cards*
eLWISE/ELWISE (Type B)
- eLWISE
- ELWISE
®
FeliCa
- Fuji Xerox IC Card
- IC Card compatible with SSFC version 1.0 format
- Other FeliCa compatible smart cards*
*: The embedded IC Card Reader of the machine may not support some smart cards.
Step 2 Logout Method Using the Smart Card
Perform the following steps to set how to logout authentication using the smart card.
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's
passcode, and select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3
Select [Tools] on the [Services Home] screen.
4
Select [Authentication/Security Settings].
5
Select [Authentication].
6
Select [User Details Setup].
Customer Support Center.
®
(Type A)

Configuration for IC Card Reader (Optional)

14
397