Create Fax Group Recipients - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

5 Tools
2
Select [Billing].
3
Enter the time for one unit charge from 0.1 to
255.9 seconds in 0.1 second increments
with the numeric keypad.
4
Select [Save].
Internet Fax Profile
Set the format of the Internet fax profile.
A profile is specified to restrict attribute information such as image resolution and paper size
for transmissions between Internet Fax-enabled machines.
TIFF-S
The Internet fax standard profile. For documents larger than A4, the size is automatically
reduced to A4 when transmission.
TIFF-F
Select this profile when you specify [Superfine] for [Resolution] or when you send A3 or B4
documents.
TIFF-J
Select this profile for sending documents in JBIG.
When the [Delete Entry] Button is Selected
5
Selecting this button deletes all the information registered for the address selected. To delete
all information registered, select [Delete].
Important • Deleted information cannot be restored.

Create Fax Group Recipients

You can register addresses for broadcast transmission as a group. Each group can
include up to 20 address numbers. The maximum number of groups that can be
registered is 50.
Note that recipients to be added to a group must be registered in the speed dials on the
Address Book.
Note
1
Select [Create Fax Group Recipients].
2
Select a group number to register.
Note
246
• Even when the speed dial number of fax recipients (address book entries) are included in a
group, the machine does not send faxes to the recipients if their address types are set to [E-
mail] or [Server].
• You cannot include a group in another group.
• You can use wildcards for specifying the numbers in the last one or two digits as shown in
the following example:
- 001∗: Specifies the 10 addresses with address numbers 010 to 019.
- ∗∗∗∗ : Specifies all address numbers.
• Select [ ] to display the previous screen
or [ ] to display the next screen.