Watermark; Software Upgrade - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

Software Upgrade

When EP system via the Internet is used, this feature is used to upgrade the software for EP
system when the version upgrade is required.
Important • After the downloading is finished, the machine automatically restarts and upgrades the
Note • EP system may not be available in some regions. For more information, contact our
For information on EP system, refer to "EP System" (P.662).
1
Select [Software Upgrade].
2
Select [Start Upgrade].
3
Select [Yes].
The machine starts downloading the software.
Note • After the downloading is finished, the machine automatically restarts and to upgrade the
Power on Self Test
Set whether or not to perform self test when the machine is turned on and started up.
If any abnormal condition such as intentional program modification is found during the
program diagnosis, the machine stops starting up and records the information in the audit log.
Note • The information may not be recorded in the audit log depending on the status of program
• If the machine does not start, contact our Customer Support Center.
Check Smart Card Details
When you select [Check Smart Card Details] and touch your smart card to the smart card
reader, the information of the smart card appears on the touch screen.
Note • You can register the authentication information using CentreWare Internet Services. For
Delete All Certificates/Initialize Settings
Deletes all certificates stored in the machine and initializes the security settings associated
with certificates. This feature is designed to use when you cannot use a certificate data in the
machine because of an abnormality of certificate file even when the certificate is set to
enabled for [SSL/TLS Settings] under [Connectivity & Network Setup] > [Security Settings].

Watermark

Watermark is the function to print text or background pattern on the whole page to
inhibit the replication of documents.
You can configure Watermark settings such as date or text, background pattern, and
watermark to embed.
Date Format
Set the format for printing dates. This setting is common to Annotation, Watermark, and
Force Annotation.
Three date formats are available: YYYY/MM/DD, MM/DD/YYYY, and DD/MM/YYYY.
software. After the machine restarts again and the [Services Home] screen is displayed, the
software upgrade is completed.
Customer Support Center.
software. After the machine restarts again and the [Services Home] screen is displayed, the
software upgrade is completed.
malfunction.
more information, refer to the help of CentreWare Internet Services.
Common Service Settings
137
5