3
Load the next document.
4
Press the <Start> button.
If you have more documents, repeat steps 3 and 4.
5
When all documents have been scanned,
select [Last Original].
Step 5 Confirming the Copy Job in Job Status
If copies are not output after you start the copy job, the job may be in pending status.
Use the following procedure to confirm the job status.
1
Press the <Job Status> button.
2
Confirm the job status.
Note
Operations during Copying
This section describes available operations during copying. The following shows the
reference section for each operation.
Stopping the Copy Job ............................................................................................................... 40
Changing the Number of Copies................................................................................................ 41
Interrupting the Copy Job........................................................................................................... 42
• Select [
] to return to the previous
screen or [
] to move to the next screen.
<Job Status> button
Copying
3
39