Fax Receiving Mode - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

Default Programming
You can start the machine using the settings stored in memory as default settings.
1
Select [Default Programming].
2
Select [Factory Defaults] or [Custom
Settings].
Factory Defaults
You can use the factory default settings.
Custom Settings
Displays the numbers stored in memory.
3
When you select [Custom Settings], select a memory number to use.
4
Select [Save].
Password
For PDF Direct Print, if a password is set for files, set the password here in advance.
PDF files can be printed only when the passwords assigned and entered are the same.
You can use up to 32 single-byte characters for the password.
1
Press [Password].
2
Enter a password of up to 32 single-byte characters with the keyboard displayed, and
select [Save].

Fax Receiving Mode

You can set a mode for receiving faxes.
Note • As for IP fax (SIP), the machine always receives faxes automatically.
For information on auto receive and manual receive, refer to "4 Fax" > "Receiving Faxes" in the User
Guide.
1
Select [Fax Receiving Mode].
2
Select a fax receiving mode.
Manual Receive
The machine manually receives faxes from a remote machine. This mode is convenient
to confirm the sender or use an external telephone before receiving faxes.
Machine Information
4
99