Notes And Restrictions; Notes And Restrictions On Using The Printer - Fuji Xerox DocuPrint 3105 User Manual

A.13

Notes and Restrictions

Notes and Restrictions on Using the Printer

This section lists the notes and restrictions that apply to the printer.
HDD Extension Kit (Optional)
• An installation of the HDD Extension Kit (optional) is required for this printer in the
following cases:
• Unavailable functions without installing the HDD Extension Kit (optional):
Sample Set*1/Secure Print*1/Print E-mail/Private Charge Print*1/Charge Print*1/
Delayed Print*1/Font downloading/Security Extension Kit function/IEEE 802.1x
Authentication function/IPsec Certificate function/ThinPrint function
*1 An additional system memory (1GB / optional) can be used instaed of an HDD
Extension Kit (optional).
*1 The function can be used by enabling a RAM Disk when no HDD Extension Kit
• Improvement of capabilities with an installation
number of recorded items (forms)/sort feature performance/spool capability/number of
log/auto-binding margin feature
• An abrupt shut down of the printer due to a power failure or other disruption when HDD
Extension Kit (optional) is installed may corrupt data on the HDD Extension Kit (optional).
• Power off processing is performed internally on the printer for a while after the power is
switched off <Energy Saver> button blinks. Make sure the <Energy Saver> button is
completely turned off before switching on the printer again.
• When HDD Extension Kit (optional) is installed, it can be specified as the save destination
of print data from lpd, SMB, or IPP. The HDD Extension Kit (optional) is the fixed save
destination for ESC/P, HP-GL/2, and PCL forms. The save destination for these forms
cannot be changed.
• Initializing the HDD Extension Kit (optional) deletes additional fonts.
• A HDD Extension Kit (optional) which has once used with a printer cannot be used for
others.
• A HDD Extension Kit (optional) is needed when obtaining the job history report in CSV
format using CentreWare Internet Services.
When printing results do not match settings
• This is caused by insufficient print page buffer capacity, and print results may differ from
settings as described below. Installation of Extension System Memory is recommended
whenever any of the following occurs.
• 1-sided printing is performed when 2-sided printing is specified.
• Print jobs are canceled (When a page cannot be rendered in the buffer, the job that
includes that page is canceled.)
• Printing results may not come out as specified when printing of a 1,200 dpi single dot or
line is specified. This is due to the characteristics of Xerography.
Optional Accessories
• For information about features that require Extension System Memory (optional), refer to
"A.5 Installing Extension System Memory" (P. 329).
(optional) is installed.
A.13 Notes and Restrictions
355