Cleaning The Constant Velocity Transport Glass And Document Presser; Cleaning The Document Feeder Rollers - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

3 Maintenance

Cleaning the Constant Velocity Transport Glass and Document Presser

If the constant velocity transport glass or document presser become soiled, smudges
may appear on copies, faxes, or scanned documents and the machine may not
properly detect document sizes.
To ensure clean copies at all times, clean the constant velocity transport glass and
document presser about once a month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
1
Wipe the document presser with a soft cloth
moistened with water to remove any dirt, and
then wipe it with a soft, dry cloth.
Important • Do not press the film of the document
3
Note
2
Wipe the constant velocity transport glass
with a soft cloth moistened with water to
remove any dirt, and then wipe it with a soft
dry cloth.
Important • Do not use cleaning agents other than
Note

Cleaning the Document Feeder Rollers

If the document feeder rollers become soiled, smudges may appear on copies, faxes,
or scanned documents and paper jams may occur.
To ensure clean copies at all times, clean the document feeder roller about once a
month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
1
Lift the latch of the document feeder top
cover until it is completely open.
Note
78
or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying, faxing, or scanning.
presser with an excessive force as it can
be easily damaged.
• Do not use cleaning agents other than
water or neutral detergent.
• If dirt does not come off easily, gently
wipe it with a soft cloth moistened with a
small amount of neutral detergent.
water or neutral detergent.
• If dirt does not come off easily, gently
wipe it with a soft cloth moistened with a
small amount of neutral detergent.
or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying, faxing, scanning, or printing.
• When you fully open the cover, it enters a
fixed position. Open the cover gently.
Document
presser
Constant velocity
transport glass