Print Overview - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

7 Printer Environment Settings

Print Overview

This machine can be set up as a local printer by directly connecting the machine to a
computer using a USB interface cable or a parallel interface cable. Similarly, it can be
set up as a network printer by connecting the machine to a network.
Enable the necessary port using the control panel or CentreWare Internet Services.
Note
7
Using the Machine as a Local Printer
Parallel
Use a parallel interface cable to directly connect the machine to a computer.
Note
For more information on how to set up the machine using parallel connection, refer to "Installation
When Using Parallel Port" (P.281).
USB
Use a USB interface cable to directly connect the machine to a computer.
For more information on how to set up the machine using USB connection, refer to "Installation When
Using USB Port" (P.284).
Using the Machine as a Network Printer
To set up the machine as a network printer, the following protocols are available to
connect the machine.
LPD
Use LPD when direct communication between the machine and a computer via TCP/
IP is available.
For more information on how to set up the machine using LPD, refer to "Installation When Using TCP/
IP (LPD/Port 9100)" (P.286).
278
Via Internet
IPP
Network connection
LPD/ SMB/ Port9100/ EtherTalk
Network connection
NetWare/ Windows shared printer
Server
• The print drivers are contained in the Driver CD Kit. For information on the driver installation
procedures, refer to the manual contained in the Driver CD Kit.
• You can download the latest print driver from our web site.
• The parallel interface is not supported for some models. An optional component is required.
Local connection
parallel/USB