Removal Of Main Shaft Motor And Coupling - JUKI AMS-210E Series Engineer's Manual

(2) Removal of main shaft motor and coupling

1. For removal of the main shaft with the coupling,
Loosen 2 set screws
motor.
2. For removal of the coupling
side.
(Caution) The screw (hole) that can be seen first is No. 1 set screw
in the forward direction
tighten No. 1 set screw
Procedures of disassembling
on the main shaft side of the coupling
from the main shaft motor
. For loosening, loosen No. 2 set screw first, and for tightening,
A A A A A
first.
No. 2 set screw
A
, and remove 4 set screws
, loosen 2 set screws
No. 1 set screw
– 7 –
on the main shaft motor
when the main shaft
No. 1 set screw
0.7mm
securing the
is turned