JUKI AMS-210E Series Engineer's Manual page 206

Error code
E302
E303
E305
E306
E307
E308
E431
E432
E433
E434
E437
Pict
Confirmation of tilt of machine head
When tilt of machine head sensor is OFF.
Phase Z detection error
Detection of the upper dead point is impossible for
the sewing machine.
Thread trimmer knife position error
The thread trimmer knife is not in the regular position.
Thread clamp position error
Thread clamp unit is not in the regular position.
External input command time out error
Input is not performed for a fixed period of time with
the external input command of vector data.
Time-out error of wait terminal
There is no input to wait terminal for a certain period
of time.
Outer presser is rising.
Proper operation has not been performed.
Number of stitches has exceeded the limit.
Hadware error has occurred.
Function cannot be selected.
Description of error
– 201 –
How to recover Place of recovery
Possible to Previous
re-start after screen
reset.
Turn OFF
the power.
Turn OFF Data input
the power. screen
Turn OFF
the power
Possible to Data input
re-start after screen
reset.
Turn OFF
the power
Possible to Previous
re-start after screen
reset.
Possible to Previous
re-start after screen
reset.
Possible to Previous
re-start after screen
reset.
Possible to Previous
re-start after screen
reset.
Possible to Previous
re-start after screen
reset.