JUKI AMS-210E Series Engineer's Manual page 13

1. For mounting the main shaft motor with the coupling,
(1) Tighten 4 set screws
coupling .
(2) The cords of the main shaft motor
2. For connecting the coupling to the main shaft motor,
(1) Provide a clearance of 0.7 mm between the coupling
(2) Apply No. 1 set screw
shaft and secure it.
3. For engaging the coupling,
(1) Position the set screw
main shaft side, and engage the coupling.
Procedures of assembling
that securing the motor, and tighten 2 set screws
should be positioned in the lateral direction.
of the coupling to the flat section
(No. 1 set screw) on the main shaft motor side between 2 set screws
– 8 –
on the main shaft side of the
and main shaft motor
of the main shaft motor
.
, the main
on the