JUKI AMS-210E Series Engineer's Manual page 135

Data deleting screen
Ending screen
Data writing error screen
(3) Program rewrite start
When the start of communication button
H
pressed, program rewriting is started.
(Caution) Never turn off the power or open/shut the
Data writing screen
When the ending screen is displayed, the replacement
work for the application software has been completed.
If any data writing error screen should be displayed, im-
mediately turn off the power supply and check the [check-
ing items] specified below. Then, take the setup actions
again.
[Checking items]
1) Did you open the smart media cover in the middle of
data communication from the smart media card.
2) Data of the smart media card are incorrect, or there
is no data file.
3) The contact point of the smart media card is contami-
nated, or suffering from poor contact.
– 130 –
smart media cover during the work. Oth-
erwise, the main body can be destroyed.
(H) is