JUKI AMS-210E Series Engineer's Manual page 52

(29) Height of the slider and pasting of the presser plate sheet (Pneumatic type only)
1. Follow the dimensions in the drawing below for pasting the presser plate sheet
Apply grease after pasting the sheet.
2. Bring the upper end of the slider
Standard Adjustment
into close contact with the presser plate
1306, 2206
2mm
1510, 2210
2mm
Presser height
adjusting screw
Rear side of the sewing machine
Rear side of the sewing machine
– 47 –
on the presser plate
.
2mm
2mm
.