JUKI AMS-210E Series Engineer's Manual page 118

A
C
4. Operational Procedures
(1) Simplified program selection screen display
When the
seconds, the simplified program button
displayed on the mode changeover screen. When
this button is pressed, the simplified program selec-
tion screen is displayed.
(2) Simplified program effective / ineffective
The simplified program comes in five patterns. In the
initial state, all the patterns are set at OFF. When the
B
simplified program setup button (B) is used, each
program can be made effective or ineffective.
(3) Simplified program editing
Simplified program No.
ber of steps
editing button
the simplified program editing screen is displayed,
which corresponds to the simplified program editing
button.
– 113 –
key is continuously pressed for 3
: Simplified program effective
: Simplified program ineffective
and the registered num-
are displayed on the program
(C). When this button is pressed,
(A) is