JUKI AMS-210E Series Engineer's Manual page 205

Error code
E032
E040
E042
E043
E045
E050
E052
E061
E063
E220
E221
Pict
File interchanging error
File cannot be read.
Sewing area over
When the sewing area is exceeded
Operation cannot be performed.
Enlarging error
Sewing pitch exceeds Max. pitch.
Pattern data error
These pattern data are not applicable.
Stop switch
When stop switch is pressed during machine
running.
Thread breakage detection error
When thread breakage is detected.
Memory switch data error
Memory switch data is broken or revision is old.
Head discrimination error
Head discrimination and the kind of control box
are different.
Grease-up warning
At the time of operation of 100 million stitches
→ Refer to "10.-(5) Replenishing the designated
places with grease".
Grease-up error
At he time of operation of 120 million stitches
The sewing machine is put in the sewing-impossible status.
It is possible to clear with memory switch
→ Refer to "10.-(5) Replenishing the designated
places with grease".
Description of error
– 200 –
How to recover Place of recovery
Possible to Data input
re-start after screen
reset.
Possible to Sewing
re-start after screen
reset.
Possible to Previous
re-start after screen
reset.
Possible to Data input
re-start after screen
reset.
Possible to Data input
re-start after screen
reset.
Possible to Step
re-start after screen
reset.
Possible to Step
re-start after screen
reset.
Turn OFF
the power.
Turn OFF
the power.
Possible to Data input
re-start after screen
reset.
Possible to Data input
re-start after screen
reset.
.