Adjusting The Speed Of The Work Clamp Feet (Pneumatic Type Only) - JUKI AMS-210E Series Engineer's Manual

(30) Adjusting the speed of the work clamp feet (Pneumatic type only)

Standard Adjustment
1. Adjust the knob 1 and the knob 2 of the speed controller mounted on the solenoid valve and make
adjustments as described below.
• Presser lifting (tube label: 1-A, 2-A) and presser lowering (tube label: 1-B, 2-B).
• Loosen the knob 2 and turn the knob 1 once fully to the right in order to make 3 turns to the left.
Since then, tighten the knob 2 .
– 49 –