JUKI AMS-210E Series Engineer's Manual page 204

Error code
E017
E018
E019
E022
E024
E027
E028
E029
E030
E031
Pict
EEP-ROM capacity over
When the mounted EEP-ROM is different in type.
Type of EEP-ROM is different.
When the mounted EEP-ROM is different in type.
File size over
Pattern data size over
File No. error
There is no designated file in the server or external
media.
Pattern data size over
When sewing cannot be performed since the size
of downloaded sewing data is too large.
Read error
Data read from server cannot be performed.
Write error
Data write to the server cannot be performed.
Smart media slot release error
Lid of smart media slot is open.
Needle bar upper position failure
Turn hand pulley to bring needle bar to its UP
position
Air pressure drop
When the air pressure is lowered.
Description of error
– 199 –
How to recover Place of recovery
Possible to Previous
re-start after screen
reset.
Previous
screen
Possible to Previous
re-start after screen
reset.
Possible to Previous
re-start after screen
reset.
Possible to Data input
re-start after screen
reset.
Possible to Previous
re-start after screen
reset.
Possible to Previous
re-start after screen
reset.
Possible to Previous
re-start after screen
reset.
Turn hand Data input
pulley to screen
bring needle
bar to its UP
position.
Possible to Data input
re-start after screen
reset.